LaserPlate Series of CTP Plate Processors have been manufactured incorporating the most up to date electronic techniques available. The complete functions of the machine are controlled from one single touch screen control.

The sleek design enables the smallest footprint available for this type of processor. Automatic start-stop saves on power; even the rewash/regum has automatic start/stop.

Two brushes in the developer ensure correct clearance of the plate. The brushes also have adjustable speed control, independent of the plate speed. Other benefits are filtering of developer, Auto Fill with Auto Level stop, replenishment by plate area, anti-oxidation, Auto Gum Wash and periodic movement of rollers during standby mode. These are but a few of the useful operations controlled by the microprocessor.

Touch screen adjustments are so easy to understand, eliminating mistakes. No knobs or dials to confuse you or accidentally get misaligned.

The LaserPlate Series has been designed for online or offline use. A Series of CTP Plate Processors built and engineered to give years of reliable use.

 

Touch screen adjustments are so easy to understand, eliminating 

mistakes. No knobs or dials to confuse you or accidentally get misaligned

 

The LaserPlate Series has been designed for online or offline use. A Series of CTP Plate Processors built and engineered to give years of reliable use.

 

 

 

 

 

Roller configuration for full series

 

 

Easy release of all rollers for cleaning. No tools are needed

MACHINE SPECIFICATIONS

  •    4 sections: Develop, wash, gum and dry

  •    Touch screen display for all functions

  •    Processing by immersion

  •    Morning Replenishment

  •    Adjustable developing time (dwell time)

  •    Low level control for developer

  •    Adjustable gumming time

  •    Plate counter (partial & total)

 

Optional equipment for all

LaserPlate Plate Processors:

  •   Conductivity Meter with inductive probe with values

             in mS displayed on the main screen

  •    Interface board with the Platesetter

  •    Plate out Detector

  •    Water recirculating units: 40 Litre 70  Litre

  •    Input & Output Table

  •    4 Page / 8 Page Spider

 

 

 

   Technical Information

 

LaserPlate 700

LaserPlate 900

   Plate Width ( Max )

660 mm

860 mm

   Plate Width ( Min )

370 mm

370 mm

   Plate Length ( Min )

40cm

40cm

   Plate Thickness

0.12/0.30mm

0.12/0.30mm

   Developing time

15 / 90 seconds

15 / 90 seconds

   Tank Capacity

26 litres

33 litres

   Water Inlet

3 / 4 washing machine connection

   Water drain (inner dia.)

40mm

   Clean Time Range

30~60 sec

30~60 sec

   Power Supply

13 amp

13 amp

   Cycle

50/60 Hz

50/60 Hz

   Approx Net Weight

270kgs

310kgs

 

 

 

LaserPlate 700

LaserPlate 900

A

350mm

350mm

B

920mm

920mm

C

700mm

900mm

D

1210mm

1410mm

E

970mm (without adjustable support feet)

F

840 / 990mm

 

 

DownLoad Leaflet

 

 

CTP PLATE PROCESSORS

PROGRESS SERIES OF PLATE PROCESSORS

PLATEPRO 460 TABLETOP PLATE PROCESSOR

VISIBLE LIGHT RANGE FOR AGFA PLATE MATERIAL

CONVENTIONAL PLATE PROCESSORS

PHOTOPOLYMER CTP PLATE PROCESSOR

THERMALINE SERIES OF PLATE PROCESSORS

   PLATE RECOVERY

 

For information, quotations and advice please

  click here    

 

 

Website Designed By Richard Foley

 

 

IGP UK LIMITED

The Offices above Unit 5

The Maltings, Maltings Road

Battlesbridge Essex

SS11 7RH

 

 

 

 

  TEL:    01245 323555

  FAX:    01245 323762